[Full Version] Free 700-070 Exam Dumps With PDF And VCE Download (1-10)

2016 December Cisco Official New Released 700-070 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

2016 latest released Cisco official 700-070 exam question free download from Lead2pass! All new updated questions and answers are real questions from Cisco Exam Center!

Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/700-070.html

QUESTION 1
What is the required ratio for the whiteboard setup?

A.    16:9
B.    4:3
C.    21:9
D.    5:7

Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/telepresence/ix5000/first_time_setup/ix5000_first_time_setup.html

QUESTION 2
Which two actions are part of the Display Connection step during endpoint configuration? (Choose two.)

A.    Determine the screen resolution.
B.    Register the endpoint to Unified Communications Manager.
C.    Perform an internal display cabling check.
D.    Determine the system layout display on Touch 10.
E.    Register the endpoint to the Cisco VCS.

Answer: AC

QUESTION 3
What is the last action item during physical setup of the IX5000?

A.    Install pillars, crossbars, and rear kick plate and toe cup.
B.    Install fascia, display trip, and outer panels.
C.    Install Touch 10 devices.
D.    Perform cable routing.

Answer: B
Explanation:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/ix5000/assembly_guide/ix5000_install_guide.pdf

QUESTION 4
Which step is required during pre-installation of the IX5000?

A.    Hang celling lights.
B.    Install wall panels.
C.    Verify that the room floor is level.
D.    Verify that appropriate licenses, upgrades, and tools are available.

Answer: D

QUESTION 5
Which Configuration > Network button restores original settings?

A.    Apply
B.    Undo
C.    Reset
D.    Restart

Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/telepresence/ix_sw/8_x/admin/guide/ix_8_admin_guide/ix_sw_admin_cfg.html

QUESTION 6
Which set of items is installed in the IX5000 endpoint structure?

A.    codecs, PDUs, subwoofer, and speakers
B.    codecs, PDUs, subwoofer, and microphones
C.    codecs, Cisco TDM Gateways, Touch 10, and speakers
D.    codecs, Cisco TDM Gateways, subwoofer, and speakers

Answer: A
Explanation:
Install the codecs, PDUs, subwoofer, speakers, and optional endpoint switches into the endpoint structure.
Note: The switches in the endpoint structure are optional items. The switches in the table legs to connect the Touch 10 device(s) are required for the Touch 10 device(s).
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/ix5000/assembly_guide/ix5000_install_guide.pdf

QUESTION 7
Where can you find the results for noise-level and reverberation tests? Cisco 700-070 Exam

A.    Touch 10 Interface > System Setup > Reports
B.    Touch 10 Interface > System Setup > Log Files
C.    Admin GUI > Logs > Reports
D.    Admin GUI > Reports > Log Files

Answer: C
Explanation:
After you run the noise level and reverberation tests, you can retrieve the reports by navigating to Logs > Reports in the Administration GUI. You will see a list of.html files whose filenames begin with Noise and RT60. Click Download to open and view the reports in an HTML browser.
http://www.cisco.com/c/en/us/td/docs/telepresence/ix5000/first_time_setup/ix5000_first_time_setup.html#65094

QUESTION 8
How many hours does the initial camera setup typically require?

A.    3 to 4
B.    2 to 3
C.    1 to 2
D.    less than 1

Answer: D

QUESTION 9
Which device type is correct for the IX5200?

A.    Cisco TelePresence IX5200 (9 seats)
B.    Cisco TelePresence IX5200 (18 seats)
C.    Cisco TelePresence IX5000 (9 seats)
D.    Cisco TelePresence IX5000 (18 seats)

Answer: B
Explanation:
The IX5000 Series includes the single-row, six-seat IX5000 system, and the dual-row, 18-seat IX5200 system.
http://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/ix5000-series/datasheet-c78-733257.html

QUESTION 10
Which two options are available on the Touch 10 Home screen? (Choose two.)

A.    Share presentations locally.
B.    Add directory contacts.
C.    Modify system settings.
D.    Place and receive calls.
E.    Modify network settings.

Answer: AD
Explanation:
Place and receive calls, join meetings, and share presentations locally from the Home Screen  https://www.cisco.com/c/dam/en/us/td/docs/telepresence/ix_sw/8_x/user/quickref/tp-ix5x00-qsg.pdf

Lead2pass offers the latest Cisco 700-070 exam questions and answers in PDF & VCE. We promise 100% 700-070 exam pass or full money back (Have a try- If success, you will get a high pay job! Failed, nothing, money back!)! We provide instant download of our 700-070 dumps after payment so you can study earlier than others!

700-070 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDenhEenBHcHdMakk

2016 Cisco 700-070 exam dumps (All 60 Q&As) from Lead2pass:

http://www.lead2pass.com/700-070.html [100% Exam Pass Guaranteed]

You may also like