[May 2018] 100% Free Lead2pass 70-735 New Questions Download 70q

100% New Updated 70-735 New Questions Lead2pass Helps Pass 70-735 Exam Successfully:

https://www.lead2pass.com/70-735.html

QUESTION 41
You have a computer named Computer1.
You deploy an image of Windows 10 to Computer1.
You start Computer1 in audit mode, and then you install several device drivers.
You need to capture an image of Computer1.
Which tool should you use?

A.    Windows System Image Manager (Windows SIM)
B.    dism.exe
C.    Express Deployment Tool (EDT) for Windows 10
D.    scanstate.exe

Answer: A

QUESTION 42
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a computer named Computer1 that runs Windows 10. Computer1 has the Windows Assessment and Deployment Kit (Windows ADK) installed.
You are building a new image of windows 10.
You need to specify how the hard disk will be partitioned during the Windows 10 installation.
What should you do?

A.    Mount the Install.wim file.
B.    Mount the Boot.wim file.
C.    Modify the Winpeshl.ini file.
D.    Create an answer file.
E.    Modify the Windows.ini file.
F.    Create a provisioning package.
G.    Load a catalog file (.clg).
H.    Create a cabinet file (.cab).

Answer: A

QUESTION 43
You have a computer that runs Window 10. The computer starts in UEFI mode and has a 64-bit processor.
You insert a USB key in the computer. The USB key has a drive letter of F.
You need to ensure that you can start the computer by using Windows Preinstallation Environment (Windows PE) from the USB key.
Which two commands should you run? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A.    makewinpemedia.cmd /UFD C:\WinPE F:
B.    makewinpemedia.cmd /ISO C:\WinPE F:
C.    copype.cmd amd64 C:\WinPE
D.    dism.exe /Export-Image /SourceImageFile:C\WinPE\boot.wim /SourceIndex:1 /DestinationImageFile:F\boot.wim
E.    copype.cmd x86 C:\WinPE

Answer: AC

QUESTION 44
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You install Windows 10 on several devices.
You need to add a trusted root certification to the devices. You must achieve the goal with out reinstalling Windows 10.
What should you do?

A.    Mount the Install.wim file.
B.    Mount the Boot.wim file.
C.    Modify the Winpeshl.ini file.
D.    Create an answer file.
E.    Modify the Windows.ini file.
F.    Create a provisioning package.
G.    Load a catalog file (.clg).
H.    Create a cabinet file (.cab).

Answer: H

QUESTION 45
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a custom image of Windows 10.
You need to deploy the image to a computer.
Which parameter should you specify when you run dism.exe?

A.    /Add-Capability
B.    /Add-Driver
C.    /Add-Package
D.    /Add-ProvisionedAppxPackage
E.    /Apply-CustomDataImage
F.    /Apply-Image
G.    /Apply-Unattend
H.    /Export-Image

Answer: G

QUESTION 46
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a computer named Computer1 that runs Windows 10. Computer1 has the Windows Assessment and Deployment Kit (Windows ADK) installed.
You create the working directories for the customization of a Windows Preinstallation Environment (Windows PE) image.
You need to add scripting support to windows PE.
What should you do first?

A.    Mount the Install.wim file.
B.    Mount the Boot.wim file.
C.    Modify the Winpeshl.ini file.
D.    Create an answer file.
E.    Modify the Windows.ini file.
F.    Create a provisioning package.
G.    Load a catalog file (.clg).
H.    Create a cabinet file (.cab).

Answer: B

QUESTION 47
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You mount an image of Windows 10.
You download 10 Windows 10 update packages to separate folders.
Some of the update packages contain dependencies to the other update packages.
You are unaware of the specific dependencies.
You need to add all the update packages to the image in the correct order.
Solution: You copy all the update to the same folder. You run dism.exe /Add-Package once and specify the /PackagePath parameter once.
Does this meet the goal?

A.    Yes
B.    No

Answer: A

QUESTION 48
You have an image of Windows 10.
You plan to deploy the image to a new computer.
You run sysprep.exe /generalize /oobe /shutdown, and then you capture the image.
You deploy the image to the computer.
You add an application and a driver to the online image.
You need to prepare the computer for the end user.
Which command should you run?

A.    sysprep.exe /oobe
B.    sysprep.exe /generalize /audit
C.    dism.exe /Apply-Image
D.    imagex.exe /capture

Answer: A

QUESTION 49
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have an image of Windows 10 for a new desktop computer model.
The computer uses specific out-of-box device drivers stored in the INF format.
You need to update the drivers by using an answer file.
Which parameter should you specify when you run dism.exe?

A.    /Add-Capability
B.    /Add-Driver
C.    /Add-Package
D.    /Add-ProvisionedAppxPackage
E.    /Apply-CustomDataImage
F.    /Apply-Image
G.    /Apply-Unattend
H.    /Export-Image

Answer: B

QUESTION 50
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You mount an image of Windows 10.
You download 10 Windows 10 update packages to separate folders.
Some of the update packages contain dependencies to the other update packages.
You are unaware of the specific dependencies.
You need to add all the update packages to the image in the correct order.
Solution: You run dism.exe /Get-Packages, and then you pipe the output to dism.exe /Add-Package.
Does this meet the goal?

A.    Yes
B.    No

Answer: B

70-735 dumps full version (PDF&VCE): https://www.lead2pass.com/70-735.html

Large amount of free 70-735 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDSGhETmtzcDh3czA

Continue Reading

[March 2018] Free Lead2pass Microsoft 70-735 PDF Dumps With The Latest Update Exam Questions 70q

Free Lead2pass Microsoft 70-735 PDF Exam Questions And Answers Download:

https://www.lead2pass.com/70-735.html

QUESTION 31
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a computer named Computer1 that runs Windows 10.
Computer1 has the Windows Assessment and Deployment Kit (Windows ADK) installed.
You are building a new image of Windows 10.
You have a network share that contains the driver files. Each driver is comprised of an INF file and several DLL files.
You need to add the drivers to computers that are installed by using the Windows 10 image.
You must achieve the goal without adding the drivers to the image.
What should you do?

A.    Mount the Install.wim file.
B.    Mount the Boot.wim file.
C.    Modify the Winpeshl.ini file.
D.    Create an answer file.
E.    Modify the Windows.ini file.
F.    Create a provisioning package.
G.    Load a catalog file (.clg).
H.    Create a cabinet file (.cab).

Continue Reading

[Q21-Q30] Lead2pass 70-735 Dumps PDF Free Download

Lead2pass Microsoft 70-735 Exam Dumps Free Download:

https://www.lead2pass.com/70-735.html

QUESTION 21
You have an image of Windows 10.
You obtain a feature update for Windows 10.
You need to include the feature update in the image. The solution must minimize me size of the image.
What should you do?

A.    Mount the image. Run dism.exe /Add-Package, and then run dism.exe /Optimize-image.
Unmount the image.
B.    Deploy the image to a computer. Install the feature update. Optimize the drive, and then capture the image.
C.    Download the new installation media for Windows 10. Install Windows 10 on a computer, and then capture the image.
D.    Mount the image. Run dism.exe /Add-Package, and then run dism.exe /Cleanup-Wim.
Unmount the image.

Continue Reading

[Q21-Q30] Lead2pass 70-735 Dumps PDF Free Download

Lead2pass Microsoft 70-735 Exam Dumps Free Download:

https://www.lead2pass.com/70-735.html

QUESTION 21
You have an image of Windows 10.
You obtain a feature update for Windows 10.
You need to include the feature update in the image. The solution must minimize me size of the image.
What should you do?

A.    Mount the image. Run dism.exe /Add-Package, and then run dism.exe /Optimize-image.
Unmount the image.
B.    Deploy the image to a computer. Install the feature update. Optimize the drive, and then capture the image.
C.    Download the new installation media for Windows 10. Install Windows 10 on a computer, and then capture the image.
D.    Mount the image. Run dism.exe /Add-Package, and then run dism.exe /Cleanup-Wim.
Unmount the image.

Continue Reading

[Q1-Q10] Lead2pass Dumps For Exam 70-735 With New Updated Exam Questions

Easily Pass Microsoft 70-735 Exam With Lead2pass Latest Microsoft 70-735 Brain Dumps:

https://www.lead2pass.com/70-735.html

QUESTION 1

Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a computer named Computer1 that runs Windows 10. Computer1 has the Windows Assessment and Deployment Kit (Windows ADK) installed.
You are building a new image of Windows 10.
You copy the installation media for Windows 10 to Computer1.
You need to add drivers to the Windows 10 image.

A.    Mount the Install.wim file.
B.    Mount the Boot.wim file.
C.    Modify the Winpeshl.ini file.
D.    Create an answer file.
E.    Modify the Windows.ini file.
F.    Create a provisioning package.
G.    Load a catalog file (.clg).
H.    Create a cabinet file (.cab).

Continue Reading